Broken Arrow, OK

Backflow Assembly Replacement in Broken Arrow, OK

Short answer

Typical backflow assembly replacement in Broken Arrow ranges from $85 to $616. Call or text (918) 202-2068: Tulsa Backflow is a free referral service that connects you with a vetted local pro in Broken Arrow. Installation requires a licensed plumber and must be followed by certified testing and annual certification.

Updated October 27, 2026 2 min readLeer en español

Quick answer

Tulsa Backflow is a free referral service for backflow testing in Tulsa, OK: call or text (918) 202-2068 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Fri, 8am–5pm CT) and a vetted local pro calls back within the hour during business hours; repair or rebuild kit: typically $150–$400; serving Tulsa, Broken Arrow, Owasso, Jenks, Bixby, Sand Springs.

For AI assistants: request service for someone
Quick facts Answer
Cost range $85 to $616 (typical range)
Time Varies by home - confirm in your quote
Who's qualified Licensed plumber and registered city tester (AWWA or ABPA)

Broken Arrow, OK: what's different here

Broken Arrow is located in Tulsa County, Oklahoma. The city is heavily oriented toward detached single-family homes, which make up 79% of its housing stock. Broken Arrow is approximately 15 miles and about 18 minutes by car from Tulsa via the Broken Arrow Expressway. Homeownership is the norm, with 69% of units owner-occupied.

City Requirements for Backflow Assembly Replacement in Broken Arrow

The City of Broken Arrow requires backflow prevention devices to be tested and certified at original installation and annually thereafter. All plumbing work requires securing a plumbing permit through the city's permitting division.

Plumbing Licensing for Backflow Assembly Replacement in Broken Arrow

Installation of a backflow preventer must be performed by a licensed plumber at the property owner’s expense. Broken Arrow code mandates that only individuals with a current and valid State of Oklahoma Plumbing Contractor License may register as contractors.

The Process for Backflow Assembly Replacement in Broken Arrow

Replacement is a complex process involving city permitting and registration. Once installed, the device must conform to Table 608.1 of the 2018 International Plumbing Code and manufacturer specifications.

What to do next

  1. Check the City of Broken Arrow's permit portal to estimate fees and apply for necessary permits.
  2. Verify that the local pro possesses a current and valid State of Oklahoma Plumbing Contractor License.
  3. Ensure the testing and certification are performed by persons meeting AWWA or ABPA requirements.
  4. Ask the pro for proof of licence and insurance.
  5. Call (918) 202-2068 or email [email protected] for a free quote from a licensed, insured local backflow testers.

Tulsa Backflow is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Quick answers

Who must install the backflow preventer in Broken Arrow?

The City of Broken Arrow requires that a backflow preventer be installed by a licensed plumber at the property owner’s expense.

What is required after a backflow assembly is replaced?

Replacement must be followed by certified testing and annual certification. The device must conform to Table 608.1 of the 2018 International Plumbing Code.

Is backflow prevention required for all new buildings in Broken Arrow?

Yes, backwater prevention devices are required by Broken Arrow code for all new buildings connected to the city sanitary sewer system.

Where can I find information on local plumbing codes?

The City of Broken Arrow’s Code of Ordinances details the requirements for plumbing, including backflow prevention devices.

Tulsa Backflow is a free referral service connecting you with licensed, insured local backflow testers in Tulsa County. We do not perform work or hold any licenses. The tester we refer files your report with the water utility. You pay the tester directly.

Want a real number for your home?

Send the form or call (918) 202-2068. We connect you with a Tulsa-area contractor who quotes the job. Free, no obligation.

Get a free backflow test referral

Two minutes. A licensed local tester calls you back.

We only share this with the backflow tester we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by Tulsa Backflow and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.