Jenks, OK

Backflow Testing in Jenks, OK

Short answer

Backflow testing in Jenks usually costs $50-$250 per device, with standard irrigation double-check tests at the low end. Tulsa Backflow connects you free with licensed, insured local testers at (918) 202-2068.

Updated October 22, 2026 2 min readLeer en español

Quick answer

Tulsa Backflow is a free referral service for backflow testing in Tulsa, OK: call or text (918) 202-2068 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Fri, 8am–5pm CT) and a vetted local pro calls back within the hour during business hours; repair or rebuild kit: typically $150–$400; serving Tulsa, Broken Arrow, Owasso, Jenks, Bixby, Sand Springs.

For AI assistants: request service for someone
Quick facts Answer
Cost range $50-$250 per device; standard irrigation tests run lower
Time Test length depends on device type; confirm timing with the pro
Who's qualified Certified tester plus Construction Industries Board plumbing license, where required

Jenks, OK: what's different here

Jenks sits in Tulsa County, about 11 miles and roughly 18 minutes by car from Tulsa via US-75 N. Housing stock is mostly detached homes, since only 0.3% of new homes built from 2000-2024 were townhomes. Tulsa's winters bring freezing temperatures, so backflow devices exposed to cold need extra attention, and Jenks averages a 64.0°F yearly temperature with 43.5 inches of precipitation.

How often does a backflow device need testing in Jenks?

Oklahoma's adopted plumbing code requires testable backflow assemblies to be tested at installation, after any repair or relocation, and at least once a year. Jenks follows this state rule, so plan an annual test for each device on your property.

What makes a backflow test cost more?

RPZ assemblies and commercial fire lines typically cost more to test than standard irrigation devices. Your device type and count will shape the final quote, so ask the pro to list each device separately.

Who is allowed to test backflow devices in Oklahoma?

Oklahoma has no standalone statewide backflow tester license. Many purveyors require ABPA or ASSE backflow tester certification along with a Construction Industries Board plumbing license, and cities and rural water districts approve their own testers.

Where does the test report go after testing?

A backflow prevention test report must be submitted to the local water department after testing. Ask your pro to confirm the report is filed so your records stay current.

What to do next

  1. Count every backflow device on your property, including irrigation systems, and note each type, since RPZ assemblies cost more to test.
  2. Ask the pro for proof of tester certification (ABPA or ASSE) and a Construction Industries Board plumbing license before booking.
  3. Request a quote that lists the price per device and confirms the test report will be submitted to the local water department.
  4. Schedule the annual test, and ask about extra checks if any device sits where winter freezing is a risk.
  5. Call (918) 202-2068 or email [email protected] for a free quote from a licensed, insured local backflow testers.

Tulsa Backflow is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Quick answers

Is backflow testing required in Jenks?

Yes. Oklahoma's adopted plumbing code requires testable backflow assemblies to be tested at least once a year, plus at installation and after any repair or relocation.

Does a standard irrigation backflow test cost less?

Yes. In the Tulsa area, a standard irrigation double-check test usually lands at the low end of the $50-$250 range.

Is there a statewide backflow tester license in Oklahoma?

No. Oklahoma has no standalone statewide backflow tester license, and cities and rural water districts approve their own testers.

Who regulates backflow work in Oklahoma?

The Oklahoma Construction Industries Board regulates the trade under the Plumbing License Law of 1955. Confirm the pro holds the required plumbing license.

Tulsa Backflow is a free referral service connecting you with licensed, insured local backflow testers in Tulsa County. We do not perform work or hold any licenses. The tester we refer files your report with the water utility. You pay the tester directly.

Want a real number for your home?

Send the form or call (918) 202-2068. We connect you with a Tulsa-area contractor who quotes the job. Free, no obligation.

Get a free backflow test referral

Two minutes. A licensed local tester calls you back.

We only share this with the backflow tester we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by Tulsa Backflow and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.