| Quick facts | Answer |
|---|---|
| Cost range | $90 to $120 per device |
| Time | 15 to 30 minutes per device |
| Who's qualified | Must hold ABPA or ASSE certification and a Construction Industries Board plumbing license |
Swan Lake: what's different here
Swan Lake is a historic midtown Tulsa neighborhood known for its 1920s homes and walkable streets. It is situated near major amenities like Woodward Park and Utica Square. The area is bounded by 15th Street to the north and 21st Street to the south. The neighborhood is characterized by its historic character and proximity to central Tulsa attractions.
Tulsa Backflow Testing Regulations
Tulsa operates a Backflow Prevention/Cross Connection Control Program under Title 6, Chapter 4 of the Tulsa Revised Ordinances. Local water authorities generally require annual testing and subsequent report filing. The City of Tulsa mandates that assemblies must be tested by a City of Tulsa-approved Back Flow Assembly Tester before acceptance.
Commercial vs. Residential Backflow Testing
Standard residential backflow tests in Tulsa are often priced around $90 to $120. Commercial testing is significantly higher, commonly ranging from $180 to $300 per device. Note that RPZ assemblies and commercial fire lines may cost more to test than standard double-check valve assemblies.
Swan Lake Backflow Testing Requirements
The Swan Lake area is a historic midtown neighborhood with specific local needs for maintenance. Lawn irrigation system backflow preventers in this area should be tested annually by a qualified professional. Tulsa's climate includes mean hard freezes on November 14 and March 17, which is relevant for winterization timing.
What to Expect During Backflow Testing
A typical backflow test appointment usually takes between 15 and 30 minutes for a single device. The City of Tulsa specifies that the double check detector assembly design working pressure must be a minimum of 150 psi. The pros we refer ensure all local water meter specifications are met during the inspection.
What to do next
- Verify the local pro holds ABPA or ASSE certification.
- Confirm the assembly design working pressure is a minimum of 150 psi.
- Ask the pro for proof of licence and insurance before scheduling the backflow testing.
- Ensure your lawn irrigation system backflow preventer is scheduled for annual testing.
- Call (918) 202-2068 or email [email protected] for a free quote from a licensed, insured local backflow testers.
Tulsa Backflow is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.
