| Quick facts | Answer |
|---|---|
| Cost range | $75 to $250 |
| Time | 15 to 30 minutes per device |
| Who's qualified | Must hold current certification from an approved program such as ABPA or ASSE |
Broken Arrow, OK: what's different here
Broken Arrow has a median year built of 1986, indicating a housing stock concentrated in late-20th-century construction. The city is located about 15 miles from Tulsa, roughly an 18-minute drive via US-64 and OK 51. The area experiences about 41 inches of annual precipitation and winter lows around 29°F.
Why is double check valve testing required in Broken Arrow?
The City of Broken Arrow code mandates a backwater device for all new buildings connected to the sanitary sewer system. This requirement also applies to buildings where the lowest floor is less than one foot above the upstream manhole rim. Oklahoma plumbing codes generally require annual testing for backflow prevention assemblies.
What to expect during double check valve testing in Broken Arrow?
A double check valve assembly test typically takes 15 to 30 minutes per device. Most Oklahoma water authorities require annual testing and reporting for these assemblies. The testing process is performed by a local pro who verifies the device meets safety standards.
Who is qualified to perform backflow testing in Broken Arrow?
In Oklahoma, backflow testers must hold current certification from an approved program like ABPA or ASSE. Many jurisdictions also require the tester to hold a plumbing license. Always ask the pro for proof of licence and insurance before starting the work.
What is the typical cost range for double check valve testing in Broken Arrow?
The cost for double check valve testing varies based on whether the assembly is residential or commercial. Residential testing generally falls within the $75 to $150 range, while commercial testing is typically between $125 and $250.
What to do next
- Verify the local pro holds current certification from an approved program such as ABPA or ASSE.
- Confirm if the required double check valve testing is for installation, repair, or annual maintenance.
- Ask the pro for proof of licence and insurance before the double check valve testing begins.
- Ensure the testing meets the requirements of the City of Broken Arrow code.
- Call (918) 202-2068 or email [email protected] for a free quote from a licensed, insured local backflow testers.
Tulsa Backflow is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.
