| Quick facts | Answer |
|---|---|
| Cost range | $65 to $175 for a straightforward residential test |
| Time | About 20 to 30 minutes, longer if repairs are needed |
| Who's qualified | Testers need ABPA or ASSE certification plus a CIB plumbing license |
Sand Springs, OK: what's different here
Sand Springs is a mid-sized suburb in Tulsa County with a 2020 census population of 19,874. Many homes sit in established neighborhoods with irrigation systems already in place. The city sits just west of Tulsa, about 7 miles and roughly 10 minutes by car via the main highway. Irrigation backflow testing there follows the same metro water-use and plumbing conditions as nearby Tulsa suburbs.
How often is irrigation backflow testing required in Sand Springs?
Oklahoma's plumbing code requires backflow assemblies to be tested at installation, after repair or relocation, and at least once a year. The rules are tied to the 2018 International Plumbing Code with state amendments. Testable devices include reduced-pressure principle, double-check, and vacuum breaker assemblies.
Who can perform irrigation backflow testing in Sand Springs?
Oklahoma has no statewide backflow tester license. Each city or rural water district approves its own testers, and many require ABPA or ASSE certification plus a Construction Industries Board plumbing license. Sand Springs testing typically follows local utility acceptance rules rather than a single statewide list.
Why does my irrigation system need backflow testing?
Lawn irrigation connects potable supply to outdoor plumbing that can pull contaminated water back into the drinking supply. Oklahoma DEQ rules prohibit cross connections between public and private water systems. Air gaps or reduced-pressure protection are required where hazards exist.
When should I schedule irrigation backflow testing in Sand Springs?
Tulsa's mean first 28°F hard freeze is November 14, and the mean last one is March 17. Many homeowners test in spring before turning irrigation back on. A typical test takes about 20 to 30 minutes, though it can run longer if the assembly fails.
What to do next
- Ask the tester for proof of ABPA or ASSE certification and a Construction Industries Board plumbing license.
- Request a quote that states the price per device, since national rates run $30 to $300.
- Schedule the annual test before the mean first hard freeze on November 14.
- Ask whether the quoted price covers paperwork filed with the local water utility.
- Call (918) 202-2068 or email [email protected] for a free quote from a licensed, insured local backflow testers.
Tulsa Backflow is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.
