Backflow Device Recertification in Sand Springs, OK

Quick facts	Answer
Cost range	$50-$250 for most Oklahoma backflow tests
Time	Usually annual; Oklahoma requires at least yearly testing
Who's qualified	Most Oklahoma water purveyors accept ASSE or ABPA certified testers

Sand Springs, OK: what's different here

Sand Springs sits in Tulsa County, about 7 miles and roughly 10 minutes from Tulsa via OK-51 W/US-64 W. The average home there was built in 1979, so many properties carry backflow assemblies several decades old. With a mean of 241 days between Tulsa-area 28°F hard freezes, seasonal timing matters for irrigation and device protection.

Why is backflow device recertification required every year in Sand Springs?

Oklahoma water utilities typically require a test on every installed backflow assembly each year. The state's adopted plumbing code also calls for testing at installation and after any repair or relocation. An annual visit keeps you in compliance with both.

What certification should a Sand Springs backflow tester hold?

Oklahoma has no statewide backflow tester certification program, so local jurisdictions and water purveyors set their own standards. Most accept ASSE or ABPA credentials. Ask the pro for proof of certification and insurance before the test.

How does device recertification differ from tester recertification?

Device recertification is the annual test of your installed assembly. Tester recertification is a $500 course for the tester, with a written exam and hands-on examination that renews tester, surveyor, and repairer credentials under ASSE guidelines.

When should Sand Springs homeowners schedule testing?

Tulsa's mean first 28°F hard freeze hits around November 14, and the mean last one is March 17. Scheduling your annual test before the freeze season gives time for any repairs before winterization.

What to do next

Ask the tester to confirm your assembly type - double check, RPZ, pressure vacuum breaker, or spill-resistant vacuum breaker - since it drives the price.
Verify the tester's ASSE or ABPA credential with your water purveyor, since Oklahoma sets certification standards locally.
Request a written quote itemizing the test fee and any repair charges, since repairs trigger immediate retesting under the plumbing code.
Schedule before the November 14 mean hard freeze if the device serves irrigation.
Call (918) 202-2068 or email [email protected] for a free quote from a licensed, insured local backflow testers.

Tulsa Backflow is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Quick answers

Does the City of Tulsa have its own tester approval?

Yes. City of Tulsa water-meter specifications require backflow assemblies to be tested by a City of Tulsa-approved Back Flow Assembly Tester before acceptance.

What is tested during a device recertification?

Per ASSE 5110 field procedures, testers check assemblies like reduced pressure principle, double check valve, and pressure vacuum breaker devices. The Oklahoma plumbing code references ASSE 5013 and related standards.

Do fire-line and RPZ devices cost the same as irrigation double checks?

No. Most Oklahoma tests run $50-$250, with standard irrigation double checks near the low end and RPZ or fire-line devices costing more.

How does a tester stay certified?

Under ASSE general guidelines, testers must complete a recertification course. It costs about $500, includes training and exam fees, and requires a written exam plus a hands-on examination.