| Quick facts | Answer |
|---|---|
| Cost range | Typically $30 to $300 per device; national average about $165 |
| Time | A straightforward test takes about 20 minutes |
| Who's qualified | A tester with ASSE or ABPA certification, as most Oklahoma jurisdictions require |
Sand Springs, OK: what's different here
Sand Springs sits in Tulsa County, about 7 miles and roughly 10 minutes from Tulsa by the main highway. Being in the Tulsa metro means the same freeze-risk climate: the mean first 28°F hard freeze hits around November 14 and the last around March 17. Outdoor plumbing and backflow devices face those seasonal swings, which makes annual testing and timely winterization important for commercial properties.
How often is commercial backflow testing required in Sand Springs?
Backflow testing in Sand Springs is usually required every year by the local water utility. Commercial properties with backflow prevention devices generally need annual testing and a report for each installed assembly. The certified tester files the report with the local water authority.
Who can perform commercial backflow testing in Sand Springs?
A certified backflow tester performs the test and files the report with the local water authority. Oklahoma has no statewide tester certification program, so local jurisdictions and water purveyors set their own standards. Most Oklahoma jurisdictions require ASSE or ABPA certification, so ask any pro for proof before hiring.
What standards does a backflow test in Oklahoma follow?
Oklahoma testing procedures must follow recognized standards such as ASSE 5013, 5015, 5020, 5047, 5048, 5052, 5056, or CSA B64.10 / B64.10.1. In Tulsa, a backflow assembly must be tested by a City of Tulsa-approved Back Flow Assembly Tester before acceptance. Confirm which standard applies to your device.
How does Sand Springs weather affect backflow devices?
Tulsa's climate includes a mean first 28°F hard freeze on November 14 and a mean last hard freeze on March 17, with a mean of 241 days between hard freezes. Seasonal conditions can affect outdoor plumbing and backflow devices. Plan winterization before the first hard freeze.
What to do next
- Count every backflow assembly on your commercial property so each device gets its annual test and report.
- Verify the tester holds ASSE or ABPA certification, which most Oklahoma jurisdictions require.
- Ask the pro which recognized standard (such as ASSE 5013 or 5015) applies to your device.
- Get a written quote per device, since prices typically run $30 to $300.
- Call (918) 202-2068 or email [email protected] for a free quote from a licensed, insured local backflow testers.
Tulsa Backflow is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.
